Clear-Com FreeSpeak - Manual (Page 6)

CellCom/FreeSpeak Firmware Update Procedures
Rev: 6.05 VGC Part No.- 810372Z-MAN-6 Page 6 of 49
Power On the Beltpack and
wait 20 Seconds.
Does the
Beltpack show
“Clear-Com
Searching” ?
Register the Beltpack with a Matrix using a
Config Editor and download the map to the
matrix. Power down the Beltpack
Yes
1.Press and Hold the Left and Right menu keys for 5 seconds to enter
the Beltpacks Programming Mode. Then Release the Menu keys.
2. Tap the Right menu button until the “View status” Menu option is
displayed. Then press the reply key.
3. Tap the Right menu button until the “Beltpack Version” Menu option
is displayed. Then press the reply key.
No
Does the
DECT version
end in the letters
“_rm5"?
The beltpack is a PD2202 or MKI with an
RM5 DECT module. Use the
Freespeak Upgrader to update the
Beltpack Application
Does the
APP version start
with “3K”?
Yes
The beltpack is a PD2202 or MKI with a
KIRK DECT module. Use the
Freespeak Upgrader to update the
Beltpack Application
No
The beltpack is a MKII with a KIRK DECT
module. Use the Freespeak Upgrader to
update the Beltpack Application
*Is
the DECT
version the latest
release?
(MKI or 2202)
See “Beltpack Opening” and
upgrade the RM5 DECT
Yes
No
*Is
the DECT
version the latest
release ?
(MKI or 2202)
See “Beltpack Opening”
and upgrade the
KIRK DECT
No
START
CELLCOM / FREESPEAK
BELTPACK FIRMWARE UPGRADE
GUIDE FOR
PD2202 / MKI / MKII
No
*Is
the DECT
version the latest
release?
Yes Yes
(MKII)
DO NOT OPEN THE BELTPACK
Upgrade the KIRK DECT with the
latest DECT firmware
No
*Is
the application
version the latest
release?
No
*Is
the application
version the latest
release?
No
FINISHED
Yes
Yes
*Is
the application
version the latest
release?
No
FINISHED
Yes
Yes
Reply Key
Left Menu Right Menu
* See the release notes for latest version information.