Clear-Com FreeSpeak - Manual (Page 15)

CellCom/FreeSpeak Firmware Update Procedures
Rev: 6.05 VGC Part No.- 810372Z-MAN-6 Page 15 of 49
3.2.1 “Freespeak Upgrader” for Antenna Updates
1) Run FreeSpeak Upgrader on the PC (make sure that the correct COM port is
selected).
2) Make sure the selected Firmware File is the latest AA release
3) Click Download (the AA should still be connected to the PC via the beltpack
registration cable).
4) When the firmware file is downloaded successfully (takes about 2 mins) the
Green status LED should start flashing at about 1Hz.
5) If dissembled - remove the registration cable and power the AA down. Put the
cover onto the AA and screw it together again.