Clear-Com Eclipse-Omega - Manual (Page 75)

Clear-Com
Eclipse Omega Instruction Manual 5 - 1
ECLIPSE IVC-32
INTERFACE
INSTANT VOICE COMMUNICATION INTER-
FACE DESCRIPTION
The Instant Voice Communication (IVC-32) interface allows the
Eclipse matrix connectivity over IP to V-Series IP panels and Concert
servers. The IVC-32 interfaces must be fitted in the rightmost
available slots on the Omega (furthest from the config cards) and up to
four IVC-32 interfaces can be fitted on an Eclipse Omega matrix.
Using all four IVC-32 interfaces that can be fitted would allow up to 128
IP connections from V-Series IP panels and Concert users to a matrix.
Each IVC-32 interface consists of a front card with a reset button and
various status indicators, and a rear card with eleven RJ45 ports giving
eight E1/T1 ports (not used), DECT sync in and out (not used) and a
LAN port used for the IP connection.
Each IVC-32 front card has status LEDs for power, port activity and
LAN status. The port activity LEDs are not active on the IVC-32 front
card as the E1/T1 ports are not used.
Note: It is necessary to have an ethernet cable connected to the
IVC-32 interface LAN port for the card to function correctly.
5