Clear-Com Eclipse-Omega - Manual (Page 17)

Clear-Com
Eclipse Omega Instruction Manual 1 - 5
Each E-QUE front card has status LEDs for power, port activity and
LAN status. The port activity LEDs indicate whether there is a device
connected to an E1 port and that a connection has been established
between this port and the connected device.
The E-QUE interfaces must be fitted in the rightmost available slots
(furthest away from the CPU cards) on the Omega and up to four
E-QUE interfaces can be fitted on a matrix.
New functionality for E-QUE interfaces has been added in the Eclipse
software from release version 5.0. The new functionality provides E1
and T1 trunking, and E1 audio tie-lines to a 4000 system (as described
in chapter 4 of this manual).
IVC-32 IP Interface
The IVC-32 interface allows the Eclipse matrix to connect to IP
enabled V-Series panels and Concert users via an IP network.
Each IVC-32 interface consists of a front card with a reset button and
various status indicators, and a rear card with eleven RJ45 ports giving
eight E1/T1 ports (not used), DECT sync in and out (not used) and a
LAN port for IP connectivity.
Each IVC-32 front card has status LEDs for power, port activity and
LAN status.
The LAN indicators show whether there is a LAN connection and the
IP activity on the LAN port.
The IVC-32 cards must be fitted in the rightmost available slots
(furthest away from the CPU cards) on the Omega and up to four
IVC-32 interfaces can be fitted to a matrix.
LMC-64 Interface
The LMC-64 interface allows the Eclipse matrix to provide Production
Maestro Pro clients with audio level metering of Party Lines
(Conferences) and 4-Wire ports via an IP network.
Each LMC-64 interface consists of a front card with a reset button and
various status indicators, and a rear card with eleven RJ45 ports giving
eight E1/T1 ports (not used), DECT sync in and out (not used) and a
LAN port for IP connectivity.
Each LMC-64 front card has status LEDs for power, port activity and
LAN status.
The LAN indicators show whether there is a LAN connection and the
IP activity on the LAN port.
The LMC-64 cards must be fitted in the rightmost available slots
(furthest away from the CPU cards) on the Omega and up to four
LMC-64 interfaces can be fitted to a matrix.