Clear-Com HX System Frames User Manual
Page 96
Key to E-QUE front panel lights and controls
Feature
Description
A
RESET button
Pressing the reset button causes the card and all links to momentarily stop
their current activity and to restart.
During the reset, configuration information downloads to the card from the
CPU card. If the entire system is operating except for one E-QUE card press
the reset button for that card only.
Tip:
The reset button is slightly recessed from the front panel to prevent it
from being accidentally pressed. A tool such as a bent paper clip is required to
press this button.
B
Power supply lights
+3.3-Volt Power Supply Light
The matrix’s +3.3-volt power supply provides electric current to this green
light. When lit, the light indicates that the +3.3-volt supply is present and
supplying power to the card.
C
Status lights
When lit, a status light indicates successful communication between the
E-QUE card and a connected device such as an active antenna or splitter.
Each of the E-QUE card’s 8
yellow
status lights corresponds to one of 8
ports to which devices can be connected.
D
LAN DATA light
The
green
LAN DATA light illuminates to indicate there is data passing
through the Ethernet port.
LAN LINK light
The
amber
LAN LINK light illuminates to indicate a connection to the LAN
port.
Table 21: Key to E-QUE front panel lights and controls
96
Eclipse HX-Delta User Guide