Clear-Com HX System Frames - Manual (Page 101)

Figure 35: Multiple matrices with DECT Sync Interconnect
Note:
All connections are made using CAT5 cable and it is recommended that shielded cable is
used.
If an E-QUE interface is fitted in the matrix with antennae or splitters connected and active
inserting a second E-QUE interface above the first interface (seen from the front) will cause
a temporary loss of audio to beltpacks using the original E-QUE interface (usually for about
10 seconds). The beltpacks do not go offline and signalization is not lost.
101 Eclipse HX-Delta User Guide