beautypg.com

1 eclipse hx-delta rear connector panels, Eclipse hx-delta rear connector panels – Clear-Com HX System Frames User Manual

Page 68

background image


5.8.1 Eclipse HX-Delta rear connector panels

There are seven types of rear-connector panels:

Panel

Description

CPU card

A CPU-card rear panel holds the various
connectors associated with the CPU card,
such as the RS-232 connector for the
configuration computer.

Analog port card (MVX-A16)

Analog port-card rear panel holds the sixteen
RJ-45 connectors associated with its
corresponding analog port-card front panel.

User panels and interface modules connect
to the matrix through this rear-connector
panel.

E-MADI64 card

An E-MADI64 rear card comprises a MADI
fiber connector, MADI input and output
coaxial cable connectors, and a coaxial
Video / Word clock input.

E-FIB fiber card

An E-FIB fiber card provides two ports to
connect fiber network cables.

E-QUE card

An E-QUE card provides eight RJ-45 ports
for connection to wireless equipment and
three RJ-45 ports for DECT sync and LAN
connections.

IVC-32 card

An IVC-32 card provides a RJ-45 port for
connection to an IP network. No other ports
are used.

LMC-64 card

An LMC-64 card provides a RJ-45 port for
connection to an IP network. No other ports
are used.

Table 15: Rear connector panels

Note:

A blank panel covers an unused slot in the matrix.

68

Eclipse HX-Delta User Guide

This manual is related to the following products: