Clear-Com HX System Frames - Manual (Page 54)

5 Using the Eclipse HX-Delta
This chapter describes how to operate the Eclipse HX-Delta matrix, including its CPU cards
and interface cards.
Tip: For an overview of the Eclipse HX-Delta, see 3 Overview .
5.1 Creating and storing system configurations
A configuration is a complete set of operating parameters for the system which includes
talk and listen paths for each connected intercom device.
Depending on the interface cards and modules installed, the configuration can include more
complex features such as paging, call signaling, interrupt foldback (IFB), ISO, groups,
automatic DTMF dialing, and routing.
When an external computer is connected to the matrix, you can:
• Retrieve the current configuration information stored in the CPU microprocessor’s
memory and display the configuration in EHX.
• Apply the current configuration, modify it, or create a new configuration in EHX.
If you create more than one configuration, you can store the unused configurations on the
computer’s hard disk or on CD-ROM for later use.
Note:
The CPU card in the Eclipse HX-Delta stores up to four complete configurations. You can
apply a configuration directly from the CPU card or from the connected PC.
54 Eclipse HX-Delta User Guide