beautypg.com

3 ivc-32 interface applications, 1 v-series ip panels, 2 ip linking and trunking – Clear-Com HX System Frames User Manual

Page 112: Ivc-32 interface applications, V-series ip panels, Ip linking and trunking

background image


Key to IVC-32 rear panel connectors

Feature

Description

A

LAN port (RJ-45)

B

DECT sync ports:

DECT Ref in (Not used)

DECT Ref out (Not used)

C

E1 / T1 Port 1 - 4 (Not used)

D

E1 / T1 Port 5 - 8 (Not used)

Table 24: Key to IVC-32 rear panel connectors

Note:

The E1/T1 and DECT ports are not used on the IVC-32 interface and should not be
connected.

9.3 IVC-32 interface applications

The IVC-32 interface may be used to connect:

• V-Series IP panels to an Eclipse matrix.

• Different Eclipse HX Matrices to each other using IP linking and trunking.

• Provide a link to a Concert Instant Voice Router (IV-R) server.

9.3.1 V-Series IP Panels

V-Series panels with V5.1 or later software may be enabled to communicate with an Eclipse
HX-Delta matrix over an IP network using the IVC-32 interface card.

The advantage of using IP communication is that it enables remote panels to communicate
over an existing local (LAN) or wide area (WAN) network rather than requiring a dedicated
link.

9.3.2 IP linking and trunking

The Eclipse IVC-32 cards allow directs and trunks over IP network infrastructure. All IP trunks and
directs can be compared directly to 4-wire trunks and directs. They consist of:

• A single duplex audio channel
• A known start point and end point

Links have to be made over IP before the trunk/direct can be used.

112

Eclipse HX-Delta User Guide

This manual is related to the following products: