Clear-Com HX System Frames - Manual (Page 23)

3.3.3 E-QUE interface card (for FreeSpeak/CellCom connections
and E1 / T1 trunk lines)
The E-QUE interface card allows the Eclipse HX-Delta to connect to FreeSpeak/CellCom
antennas, FreeSpeak/CellCom antenna splitters, and E1 and T1 trunk lines.
Each E-QUE interface card set comprises:
• A front card with a reset button and various status indicators.
• A rear card with eleven RJ-45 ports giving eight standard Ethernet ports, DECT sync
in and out and a LAN port for diagnostic use.
Each E-QUE front card has status LEDs for power, port activity and LAN status. The port
activity LEDs show when
• A device is connected to an E1 port.
• A connection has been established between the E1 port and the connected device.
3.3.4 E-MADI64 MADI interface card
The E-MADI64 is a MADI (Multichannel Audio Digital Interface) card, providing up to 64
duplex channels of AES3 digital audio over a coaxial cable or fiber pair between compatible
devices.
Note:
You have the option in EHX to limit the E-MADI64 card to either 32, 56 or 64 channels of
audio. All MADI channels have standard EHX settings, including VOX and in-use tally. See
also 6 E-MADI64 card.
Each E-MADI64 card set comprises:
• A front card with pin reset and various status indicators (including channel quantity,
sample rate, power and diagnostic (active and error) indicators).
• A rear card with a MADI fiber connector, MADI input and output coaxial cable
connectors, and coaxial Video black and burst / Tri Level HD / Word clock sync input.
23 Eclipse HX-Delta User Guide