Clear-Com HX System Frames - Manual (Page 17)

• Temperature warning light [Overtemp]. When lit, this
red warning
light indicates that the matrix is above the maximum operational
temperature limit and is in danger of overheating.
• Internal PSU failure light [Int PSU Fail]. When lit, this
red warning
light indicates that the internal power supply has failed.
• External PSU failure lights [Ext PSU Fail (1/2)]. There are two
external PSU failure lights, one for each of the twin external 12V power
supplies. When lit, the
red warning light indicates that the external
power supply has failed. If both lights are lit, both the power supplies
have failed.
• Fan failure lights [Fan Fail (1/2)]. There are two cooling fan failure
lights, one for each of the two cooling fans in the matrix. When lit, the
red warning light indicates that a fan has failed. If both lights are lit, both
the fans have failed.
For more information, see 5.7 Power status and alarm lights .
F
Handle. There are handles on either side of the matrix to facilitate placing and
removing the Eclipse HX-Delta in the 19” rack.
Table 3: Key to Eclipse HX-Delta front panel
17 Eclipse HX-Delta User Guide