Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 98)

10.47.1Syntax
snmp access [read|write|delete|flush]
snmp config [save]
snmp help [|all]
snmp trap [add|delete|flush|list]
snmp version
10.47.2Description
Manages the list of SNMP community names (also used as passwords by other
applications, such as telnet) and the list of SNMP trap destinations. (See the ATMOS
TCP/IP Functional Specification, DO-007285-PS for information about the interface
to this information.)
The syntax of the commands is documented in the ATMOS SNMP Functional
Specification, DO-007285-PS.
The snmp version command displays the version number of ATMOS SNMP. Note,
the version number returned is the internal version number of Virata’s code, not the
version of the SNMP protocol supported, which is SNMP v1.
Note – In standard ATMOS systems the console is configured to allow the
commands to be accessed by typing just snmp … instead of ip snmp … at the
command line.
10.48 stats
10.48.1Syntax
stats arp|icmp|ip|raw|tcp|udp [reset]
stats help [|all]
10.48.2Description
Displays or clears a subset of IP statistics.
10.48.3Example
mymachine>
ip stats udp
ip: UDP receptions delivered to users: 0
ip: UDP receptions with no users: 170
ip: Otherwise discarded UDP receptions: 0
ip: Transmitted UDP packets: 35
mymachine>
ip stats udp reset
mymachine>
ip stats udp
ip: UDP receptions delivered to users: 0
ip: UDP receptions with no users: 0
ip: Otherwise discarded UDP receptions: 0