Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 83)

10.18.1Syntax
ipatm arpserver [ [|here]]
10.18.2Description
Displays or sets the ATMARP server used for an interface, which must be an
IP-over-ATM interface using SVCs. The interface name is optional when displaying:
if omitted, the ATMARP servers for all such interfaces are listed. (Since currently
there can only be one such interface, this behaviour is present only for possible
consistency with future versions.)
The parameter here causes no ATMARP server to be used; only the local ATMARP
cache will be consulted when setting up an SVC. This will normally be used when
this machine is the ATMARP server for the local network.
Configuration saving saves this information.
10.18.3Example
mymachine>
ip ipatm arpserver
ipatm arpserver atm here
mymachine>
ip ipatm arpserver atm
47.0.83.10.a2.0.0.0.0.0.0.0.0.0.20.2b.4.3.8.0
mymachine>
ip ipatm arpserver atm
ipatm arpserver atm
47.00.83.10.a2.00.00.00.00.00.00.00.00.00.20.2b.04.03.08.00
10.19 ipatm files
10.19.1Syntax
ipatm files
10.19.2Description
Lists the IP-over-ATM connections, listens, and slots for available connections.
10.19.3Example
mymachine> ip ipatm files
i/f atm 0 transmissions queued, 6 free connections, 4
listeners
0: on atm Connected to 192.168.220.48, idle 0ms
1: on atm Listening, (in use)
2: on atm Listening, (in use)
3: on atm Listening, (in use)
4: on atm Listening, (in use)
5: on atm Idle