Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 21)

attribute promiscuous selects the promiscuity behaviour of the driver.
The driver requires, at configuration time, to be layered with the BUN utopia and
nec98408 devices, in order to be used. So, for the sake of the following examples,
let's assume that the related BUN port is called rfc_port, and it has been configured
in the following way:
device: rfc_dev = rfc1483, nec98408, utopia
port : rfc_port = rfc_dev/PhysicalPort=0/PortSpeed=59111
If we want to attach the device to the bridge, then the following command must be
issued (all typed on one line):
bridge device add //bun/port=rfc_port/rfc1483=true
/mode=llcbridged/txvci=600/rxvci=600
The above command creates a channel with RFC1483 enabled, and it uses the LLC
encapsulation for bridged traffic. The next command, is the same, however it uses
the VC multiplexing method:
bridge device add //bun/port=rfc_port/rfc1483=true
/mode=vcmuxbridged/txvci=600/rxvci=600
3.1.4 See also
device delete on page 38 and device list on page 39.
3.2 device delete
3.2.1 Syntax
device delete
3.2.2 Description
This command deletes a device from the bridge configuration. The syntax of the
device name is the same as that for the device add command.
Configuration saving saves this information.
3.2.3 Example
device delete r1483
3.2.4 See also
device add on page 36 and device list on page 39.
3.3 device list
3.3.1 Syntax
device list
3.3.2 Description