Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 37)

trace untrace
5.3 pool
5.3.1 Syntax
dhcpclient pool [verbose]
5.3.2 Description
This command displays the state of the memory pool being used by the DHCP client.
Should the client ever run out of memory, use of this command is helpful in
determining the optimum memory pool size for the client. For example, supporting
DHCP client functionality on several interfaces simultaneously will require
proportionately more memory. The default pool size specified in the system file
dhcpclient is 40000 bytes.
The verbose option lists all allocated and freed memory chunks.
5.3.3 Example
bd3000>
dhcpclient pool
DHCP Client Memory Pool Status
total pool size 39968
free 21392
allocated 18576
mean alloc chunk 67
max free chunk 13904
5.4 status
5.4.1 Syntax
dhcpclient status [all]
5.4.2 Description
This command provides DHCP status information for the active bound lease
associated with each valid interface in turn, including IP address, time until lease
renewal, subnet mask and DHCP server address. Including the all option shows, for
each valid interface, the active lease, leases which are being, or have been offered to
the interface, and any leases which are still being held by the client which are not
currently active (since a single interface can only have one active lease at a time).
5.4.3 Example
bd3000> dhcpclient status
DHCP Client Lease Status (active lease only)
Interface 'ethernet'
Status | Server ID | IP address | Subnet mask | Renewal