Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 104)

11.2.4 Example
get ipaddresses
11.3 help
11.3.1 Syntax
help
11.3.2 Description
The help command displays the help text which lists the (commonly used) TFTP
commands. The init command is not listed in the help text.
The trace command has a large number of optional parameters and detail on this
command may be displayed by typing trace help.
If the software build supports client mode operation, these commands will be
displayed in the help text.
11.3.3 Example
help
11.4 init
11.4.1 Syntax
init
11.4.2 Description
The init command causes all sessions to be initialised to an idle state. This command
can be used during testing but is not required in normal operation. The command
does not appear in the help text.
11.4.3 Example
init
11.5 list
11.5.1 Syntax
list
11.5.2 Description
The list command displays the status of any active sessions. This command is
primarily intended for use during debug.
11.5.3 Example
list
11.6 put