Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 34)

4.15 list all open channels
4.15.1 Syntax
list all open channels
[ ]
4.15.2 Description
This command is similar to the list channels command. The list channels command
shows channels which are either enabled or open. The list all open channels
command only shows channels which are open.
If no portname is specified, all channels on all ports will be displayed.
The channels are shown with their identification number and a selection of useful
attributes. A full attribute list can be obtained via the show channel command.
4.16 show channel
4.16.1 Syntax
show channel
4.16.2 Description
Display information about the specified channel. The channel identification number
may be obtained from the list channels command. All attribute values for the
channel are displayed on the console.
Note that you must specify both a port name and channel number. Channel numbers
are only unique within a given port.
Also note that, unlike the old ATM driver, the channel number is not the same as the
receive VCI number.
It is also possible to display channels that are not currently opened by an application.
The bun.active attribute will return true if a channel is currently open, else false.
Note that a channel handle may be closed and then re-opened by an application at
any time – be cautious when using this command.
4.16.3 Example
show channel atm 0
4.17 set channel
4.17.1 Syntax
set channel /
4.17.2 Description
Modify attributes on the specified channel.
This command allows you to change the attribute values for a given channel. The