Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 65)

can be attached to the bridge or router, like other Ethernet devices in ATMOS. It also
provides an ifEntry to SNMP providing basic information about traffic through the
interface.
This command shows the basic information about byte and packet traffic through the
interface, in SNMP terms.
8.27 user
8.27.1 Syntax
user add [pwd [pap|chap]]
user []
user delete |all
8.27.2 Description
This command stores information about a particular login name/password
combination. This is referred to as a user, regardless of whether it represents an
individual.
When user is called on its own, information about all existing users is listed. When
user is called with no further arguments, details of that user alone are
printed. Passwords are not shown.
Use user delete to delete an individual user by name, or to delete all users.
Use user add to create a new user or update an existing one. The password
is stored, and the authentication protocol which must be used for this user.
If a user is deleted or changed, existing sessions are not affected.
Configuration saving saves this information.
8.28 version
8.28.1 Syntax
version
8.28.2 Description
Provide the version number for the source of the ppp process.
9. PPTP Console commands
This chapter describes the PPTP (Point-to-Point Tunnelling Protocol)
Console commands.