Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 23)

started. Creation failures occur when there is no room left in the filter table for a new
entry.
3.5.3 Example
filter
3.6 filterage
3.6.1 Syntax
filterage []
3.6.2 Description
This command sets, or displays if no arguments are given, the filter table ageing time.
The ageing time is the time after which MAC addresses are removed from the filter
table when there has been no activity. The time is specified in seconds and may be
any integer value in the range 10…100,000 seconds. This value may also be changed
through SNMP. Changing the value of filterage has immediate effect.
Configuration saving saves this information. By default, the filter ageing time is set
to 300 seconds.
3.6.3 Example
filterage
3.7 flush
3.7.1 Syntax
flush []
3.7.2 Description
This command allows the MAC entries for a specified port, or all ports, to be
removed from the filter table. The port number for a device may be determined using
the device list or status commands. If the port number is omitted, all entries for all
ports are removed from the filter table.
3.7.3 Example
flush
3.8 info
3.8.1 Syntax
info
3.8.2 Description
This command displays build information about the bridge process. The version