Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 47)

7.1.2 Description
This command displays or sets the current level of event tracing in the NAT process.
Larger values of n result in more verbose trace output. For example:
Event level Output
1 Only show fatal errors, eg. lack of system resources
2 Only show important information and problems
3 Show the creation of new sessions
4 Show trace output for discarded packets
5 Show trace output for all packets
All trace messages are printed as background output, and therefore will not be
displayed asynchronously on the console unless the event show command has been
issued.
7.1.3 Example
bd3000>
nat event
Event level: 1
bd3000>
nat event 2
7.2 help
7.2.1 Syntax
nat help [command]
7.2.2 Description
Lists the commands provided by the NAT console interface. If an optional command
name is supplied, help on that command’s usage is displayed.
7.3 interfaces
7.3.1 Syntax
nat interfaces
7.3.2 Description
The nat interfaces command displays the IP router ports on which NAT is currently
enabled. For each of these, a status and IP address is listed. The IP address is
discovered automatically from the IP stack.
The status shows the user whether NAT is currently operational on that interface
(enabled), or whether NAT is still waiting to find out the interface’s IP address (not
ready).
7.3.3 Example
bd3000>
nat interfaces