Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 50)

7.6.3 Example
bd3000>
nat protocols
Name Port/IP protocol
ftp 21/tcp
7.7 sessions
7.7.1 Syntax
nat sessions [all | summary]
7.7.2 Description
The nat sessions command displays a list of currently active NAT sessions on the
interface >. In this context, a session is a pair of source IP addresses and port
numbers (and corresponding new port number) that NAT regards as one side of an
active connection. For each TCP or UDP session active, the source and destination
IP address and port number, and the local port number and the age of the session, are
printed.
The all option causes the sessions command to print out information on every
session, including sessions which have timed out. Normally the sessions command
only shows active sessions (those which have not timed out).
The summary command does not show detailed information on each session, but
only prints out the total number of active, timed out and available sessions.
7.7.3 Example
bd3000>
nat sessions ppp
Proto Age NAT port Private address/port Public address/port
TCP 34 1024 192.168.219.38/3562 194.129.50.6/21
TCP 10 1025 192.168.219.64/2135 185.45.30.30/80
Total:
2 sessions active
101 sessions timed out
126 sessions available
7.8 stats
7.8.1 Syntax
nat stats [reset]
7.8.2 Description
This command displays various statistics gathered by NAT on the interface >.
These are cumulative totals since power on, or since the reset keyword was given.