Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 33)

4.12 show port
4.12.1 Syntax
port
4.12.2 Description
Display detailed information about a port.
This command enumerates all attributes for a port and displays them on the console.
It is useful to determine the properties of a port.
4.12.3 Example
port atm
4.13 set port
4.13.1 Syntax
set port /
4.13.2 Description
Modify a port attribute.
This command may be used to modify an attribute on a port, overriding any values
specified in the original port configuration request. The effects of changing any such
attributes are device dependent.
This command is intended for development purposes only.
4.13.3 Example
set port atm /usercomment=”An ATM network port”
4.14 list channels
4.14.1 Syntax
list channels [ ]
4.14.2 Description
List all open connections on the specified port. If no portname is specified, all
channels on all ports will be displayed.
The channels are shown with their identification number and a selection of useful
attributes. A full attribute list can be obtained via the show channel command.
All channels are shown with the Enabled attribute first, which indicates if the
channel has yet been enabled (connected) by the application code.
4.14.3 Examples:
list channels 0
list channels atm:0