Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 38)

----------+-----------------+----------------+-----------------+-----------
*ACTIVE* | 192.168.219.151 | 192.168.219.1 | 255.255.255.0 | 31 seconds
---------------------------------------------------------------------------
5.5 trace
5.5.1 Syntax
dhcpclient trace
5.5.2 Description
This command enables or disables tracing for the DHCP client. If no arguments are
given the command lists the current tracing options enabled.
The following trace options are available:
Option Description
lease Report changes in lease status (any interface)
bootp Report changes in lease status (any interface)
error Report all errors (fatal events)
Warn Report “warn” level events (important events)
Note Report “note” level events (minor/frequent events)
All All trace options
Tracing options are disabled by using the untrace command with the option names
to be disabled.
Saving configuration does not preserve the current tracing options that are enabled.
By default tracing of error, warn and note are enabled.
5.5.3 Example
bd3000>
dhcpclient trace
No tracing options currently enabled.
bd3000>
dhcpclient trace error warn note
Currently tracing: error warn note
5.6 DHCP-related IP process commands
The following commands are not provided by the DHCP client process but by the IP
process ip (For more information, see DO-007285-PS, ATMOS TCP/IP Functional
Specification.)
5.7 ip device
5.7.1 Syntax
ip device add [mtu ] [|dhcp]
ip device