Atlantis Land I-Storm A02-RA(Atmos)_ME01 - Manual (Page 75)

device ether ether //edd mtu 1500 192.168.2.1
device loop loop - mtu 2048 127.0.0.1
mymachine>
ip ping 127.0.0.1
ip: ping - reply received from 127.0.0.1
mymachine>
ip ping 192.168.2.1
ip: ping - transmit error: Host is down (rc=62)
mymachine>
ip autoloop on
mymachine>
ip ping 192.168.2.1
ip: ping - reply received from 192.168.2.1
10.6 config
10.6.1 Syntax
config [save]
10.6.2 Description
Displays the IP configuration (not including the snmp configuration), or saves it in
flash memory.
The functionality of the config command is also accessible in the standard way
through the config process (eg. config print ip), if that process is present. However,
when accessed through the config process, the snmp configuration is included.
10.6.3 Example
mymachine>
ip config
device add ether ether //edd mtu 1500 192.168.2.1
device add flane ether //lec1 mtu 1500 192.168.55.1
subnet add flane.home . 192.168.55.0 ff:ff:ff:00
subnet add ether.home . 192.168.2.0 ff:ff:ff:00
rip send ether 2
rip send flane 2
rip accept ether 1 2
rip accept flane 1 2
autoloop on
route add default 0.0.0.0 192.168.2.7 00:00:00:00 2 # MAN
relay ether ether
relay ether flane
relay flane flane
ipatm lifetime 60
# IP host table:
# Port table:
router 520/UDP