ELRO HA68S Multi-zone professional alarm system USERS MANUAL - Manual (Page 27)

-25- -40-
USER SETUP
PROGRAM MODE
Code:
1. USER SETUP
1-1 Admin
SETUP
:1 Password
xxxx
:2 Name
xxx
:3 TEL Remote
xxxxxx
Select
ON->* OFF->#
:4 Record
User Message
:5 Replay
User Message
:6 Remoter
User Message
Playing….
Stop->ESC
:6-1 Learning ID :6-2 Siren
xxx
:6-3 Del Data
Select
ON->* OFF->#
Select
ON->* OFF->#
Learning..
Learning ok
Time Out
ID Duplicate
Select
ON->* OFF->#
Recording
Stop->ESC
Playing
Enter Password:
CODE:
Enter Name:
1-2 USER1 1-3 USER2 1-4 USER3 1-5 USER4 1-6 USER5
Scroll through the top level programming menu until ‘1. USER SETUP’ is
displayed and press .
Use the and buttons to scroll through the menu until the required
user to be configured is displayed and press .
Note:
After configuring all required users press to return to the top level
programming menu.
ADMIN. & USERS 1-5
Default setting: not programmed
Scroll through the menu until the required User to be configured is displayed
and press .
ADMIN. & USER PASSWORD
Scroll through the menu until ‘:1 Password’ is displayed. For security
TELEPHONE NUMBERS
Scroll through the menu until ‘:1 SET TEL NO.’ is displayed and press .
Scroll through the menu until the required Telephone number (1-6) is displayed.
The current setting of each telephone number will also be displayed.
To change the number press .
Enter the required telephone number (32 digits. max.) by inputting 0~9, *, # .
Three available options - ‘Input Text’, ‘Input No.’ and ‘Delete’ can be chosen.
Scroll through available options, (Input Text, Input No. and ‘Delete), until the
required setting is displayed. To change the text, press .
When entering the text, press to toggle the number and character and
enter the required text.
Enter the required telephone number (32 digits. max.) by inputting 0~9, *, # .
When entering the number, press to insert a 3.6s pause in the dialing
sequence.
Press o save and exit, or
Press to exit without saving.
Notes:
Press to move the cursor left.
Press to move the cursor right.
Press to delete the character under the cursor.
Press and hold to erase the entire phone number or text.
RECORD ALARM MESSAGES
Scroll through the menu until ‘:2 Record Voice’ is displayed and press .
Scroll through the available menu options until the required message type to be
recorded is displayed.
a) Main Alarm message, (12 seconds max).
b) Intruder Alarm message, (4 seconds max).
c) Fire Alarm message, (4 seconds max).
d) Panic Alarm message, (4 seconds max).
e) Medical Help Alarm message, (4 seconds max).
To record a new message press .
Press to start the Voice Recorder. Once completed the recording will
automatically be replayed.
or
Press to exit without changing.
EN EN