Dismounting of the mfm / mfc, Packaging, storage, transport, Packaging, transport – Burkert Type 8712 User Manual
Page 49: Storage
49
Packaging,Storage,Transport
Type 8626, 8712
11.2. Dismounting of the mfm / mfc
Procedure:
B
A
C
→
Relieve the operating medium pressure in the system.
→
Control the solenoid valve to open.
→
Clean the device using a neutral fluid (nitrogen, for example).
→
Relieve the rinsing medium pressure in the system.
→
Switch off the power supply [A].
→
Disconnect the electrical connections [b].
→
Disconnect the fluid connections [c].
→
Remove the MFM / MFC.
12.
pAckAGinG, sTorAGe,
TrAnsporT
12.1. packaging, Transport
note
Damage due to transport
Inadequately protected equipment may be damaged during transport.
• Remove all cables, connections, separate filters and installation material.
• Clean and air contaminated devices.
• Protect fluid connections from damage and leaks by fitting
protective caps and seal.
• Pack the device in two suitable bags, sealed with protective film.
• During transportation protect the device against humidity and
dirt in shock-resistant packaging.
• Do not expose the device to temperatures outside the storage
temperature range.
12.2. storage
note
poor storage can damage the device.
• Store the device in a dry place away from dust.
• Storage temperature: -10 °C to +70 °C.
English