Burkert Type 8712 - Manual (Page 13)

13
Technicaldata
Type 8626, 8712
6.3. compliance to standards and
directives
MFM/MFC conformity with the EC directives comes through the
following standards:
• EMC: EN 61000-6-2, EN 61000-6-3.
The MFMs/MFCs compliant with ATEX Directive 94/9/EEC adhere to
the standards below:
• EN 60079-15
• EN 61241-1.
The MFM / MFC UL devices conform to the following standards:
• UL 61010-1
• CAN/CSA-C22.2 no. 61010-1.
6.4. mechanical data
The device may be mounted in a horizontal or vertical position: see the
calibration plate and/or the calibration protocol.
type base block
material material of the
housing port connections
8006,
8626 1.4305 stainless
steel, 1.4404
stainless steel or
anodized aluminium Painted
pressure cast
aluminium G 1/4, G 3/8, G
1/2, G 3/4
NPT 1/4, NPT 3/8,
NPT 1/2, NPT 3/4
8702,
8712 Stainless steel
1.4404 Polycarbonate
(PC) G 1/4, NPT 1/4,
flange
Sealing material: FKM or EPDM (see name plate)
Other parts of the solenoid control valve in contact with the medium:
1.4310, 1.4113 and 1.4305
6.5. Dimensions
A
12
A
12
12,5
138
115
2,5
71
37
3,9
29,2
1,9
25
42
23
2x M4
97 4
Fig. 5: Dimensions of MFMs type 8702 and MFCs type 8712
Weight stainless steel (kg)
ca. 1.4
English