Burkert Type 8712 - Manual (Page 35)

35
Operationandfunction
Type 8626, 8712
8.3. mfc operating modes
The MFC can adopt different operating modes:
operating mode status of the leDs
(default setting) binary input activation mode this operating mode may be interrupted
or ended by
Standard control mode
(see section „8.3.1“) Power LED (green) on - • Autotune function
• Safety function
• Set-point value profile
• Control mode
Autotune function
(see section „8.3.2“) Power LED (green)
flashes Input active for at least 0.5 s (permanent
input activation leads to a function restart) • Safety function
• Device reset
Safety function
(see section „8.3.3“) Limit LED (blue) flashes As long as the input is active -
English