Burkert Type 8712 - Manual (Page 48)

48
Shutdown
Type 8006, 8702
10.1.4. Additional documentation
Designation item no.
Supplement to the operating instructions for field
bus devices 804 553
Contamination Declaration 806 075
"Configuration via PROFIBUS with GDS file"
addendum 805 923
10.2. spare part
Designation item no.
Stainless steel mesh filter, mesh size 250 µm,
for 8626 / 8006 (standard fluid base) 646 808
Stainless steel mesh filter, mesh size 250 µm,
for 8626 / 8006 (high fluid flow-rate base) 651 694
Stainless steel mesh filter, mesh size 250 µm,
for 8702 654 733
Stainless steel mesh filter, mesh size 25 µm,
for 8712 676 329
11. shuTDoWn
11.1. safety instructions
danger
Danger due to high pressure in the installation.
• Shut off the gas flow, relief the pressure and drain the pipe
before loosening the process connections.
Danger from the outflow of operating fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the operating fluids used.
Danger due to electrical voltage.
• Shut down and isolate the electrical power supply before
carrying out work on the system.
• Observe all applicable accident protection and safety
regulations for electrical equipment.
Warning
risk of injury from nonconforming dismounting.
• Maintenance must only be carried out by qualified and skilled
staff with the appropriate tools.
English