Burkert Type 8712 - Manual (Page 46)

46
Accessories/Spareparts
Type 8006, 8702
types item item no.
Profibus
version
Straight M12 plug (code B) 918 198
Straight M12 socket (coupling)
(code B)
918 447
PROFIBUS* Y-piece 902 098
PROFIBUS T-piece 918 531
PROFIBUS terminal resistor
(code B)
902 553
GSD sheet Can be
downloaded at
www.burkert.
com
DeviceNet
/ CANopen
version
Straight M12 plug (code A) 917 115
Straight M12 socket (coupling)
(code A)
917 116
DVN/CAN* Y-piece 788 643
DVN/CAN T-piece Not used
DVN/CAN terminal resistor
(code A)
No bush used
EDS sheet for DeviceNet Can be
downloaded
at www.
burkert.com
* The two previous M12 connectors cannot be used together on the same
side of the Y-junction. At least one of the two M12 connectors must be a
prefabricated cable with a thinner connector.
10.1.2. fluid accessories
The MFM / MFC are equipped with a connection plate which uses a
DIN ISO 228/1 thread process connection.
A threaded fitting available as an accessory is used to connect the
device to a line:
• the connection to the device side has a DIN ISO 228/1 thread,
• the connection to the line side is available in a range of
dimensions.
A sealing ring must be ordered for each screw fitting!
English