FlexLink XK Функциональные модули Руководство пользователя - Manual (Page 33)

Mounting, installation, adjustment
Create
d
by EBCCW
0
0
:06
25 5114899
. .
5 Mounting, installation, adjustment
This section deals with the operations to have the modules function well
within a (transport) system. First section 1.2 on page 4, in which the provi-
sions to be taken care of are given, should be studied carefully. section 1.3
on page 6 is particularly important for the modules that are delivered to the
end user not fully assembled.
5.1 Recommended tools
Figure 8 Tools
5.2 Basic value, Torque for dimension
Figure 9 Basic value
Make sure before integrating (section 1.4 on page 7) that the surroundings
are clean and free from obstacles and the mounting surface is clean and
level. Besides, it should be repeated that the operations are to be carried
out in a calm and controlled way!
After having placed the modules in the correct position, the modules is to
be fastened to the mounting surface by using the holes in the adjusting
feet.
Basic value, Torque for dimension
M5 M6 M8 M10
45 Nm / 398 lb.in. 24,5 Nm / 217 lb.in. 9 Nm / 80 lb. in. 4 Nm / 35 lb. in.