FlexLink XK Функциональные модули Руководство пользователя - Manual (Page 28)

20 5114899
Functions
3.4 Function description for Divert and Merge
module 90°
The combiner function gives the opportunity to split and join highway to sat-
ellite/ satellite to highway flows in a fully controlled way. The function is
equipped with all needed parts to setup and run it, including set of sensors
(not mandatory), RFID read/write head (not mandatory), fasteners and
pneumatic actuators.
Excluded parts:
• Chain
• Slide rails for chain and guide rails
• Tubes for pneumatic circuit
• Pallets
• Cables (for sensors), RFID r/w head
• Valves for pneumatics
3.4.1 Combined Diverter/mergers
A combined diverter/merger are used to create a sub line for example to
guide pucks out and in on a satellite conveyor from the main conveyor.
They can also be used as "shortcuts".
Example where two 90° CL are used to make a "shortcut".
This function has the behaviour from both the diverter and the merger. The
prioritized order can be predetermined or decided dynamically from a line
controller.
There are two variants of the 90° Combined Diverter/Merger.
• Combined Diverter/Merger, 90°, Left
• Combined Diverter/Merger, 90°, Right
CL
90°
CR
90°
CL
90°