Dimensions, Resetting to factory defaults – eLine Technology SIP-FB User Manual
Page 34
57
58
8. DIMENSIONS
Units: mm
Because our products are subject to continuous improvement, product
design and specifications without notice and without incurring any obligation.
Resetting to Factory Defaults
7. RESETTING TO FACTORY DEFAULTS
Follow the steps below to revert all settings to factory defaults.
The camera
must be connected to power to perform a factory reset.
1.
Rear of camera has a simple to access reset button.
2. Press and hold the white
reset button for 5 seconds
then release the button to
reset the camera to factory
defaults.
NOTE: Reset has to have power
applied to the device before reset
can be made.
eLineTechnology