eLine Technology SIP-FB - Manual (Page 30)

49 50
Configuration
6.16 Default Settings
Click Default Settings. Click Restore then click OK to restore the camera to
factory default settings. The camera will reboot.
6.17 Sensor Configuration
The Sensor Configuration menu is used to adjust camera image settings.
To configure camera image settings using the Sensor Configuration menu:
• Log into the camera using a web browser, and from the Live Video page,
right-click on the video area and select Sensor Config.
Right-click in the video area
and select Sensor Config
Configuration
2. Click Privilege Manager>User.
Select the
user
Click Unlock
3. Under User, select the locked user account.
4. Click Unlock to unlock the account.
6.14 Protocol
Protocol contains the following sub-menus:
• Protocol
• Security (Not supported)
NOTE: Do not check User Verification in the Security sub-menu, as it may
block ONVIF software from detecting the camera.
6.14.1 Protocol
The Protocol page ( Protocol>Protocol) allows you to view ONVIF protocol
settings.
6.15 Device Restart
Click Device Restart. Click Restart then click OK to restart the camera.
eLineTechnology