eLine Technology ETV_v7 - Manual (Page 92)

ETV System Server Software - User’s Guide Page 92
10 Settings - DVR Settings Tab
The DVR Settings tab contains settings related to the software and hardware configuration of VIGIL Server.
Site Name
The name of the Site where VIGIL Server is located. The site name is included when saving still
images.
Allow Auto Detect Allow the Server to be Auto Detected by Central Management and Client Software.
Offsite Backup on Alarm
Enable automatic export of footage to the specified offsite location when a DIO alarm occurs.
Enable Offsite
Backup
Click the Check Box to enable this option. Click … and select Windows or VFS Path to browse to a
network location where the footage will be saved.
Alarm Input Select the DIO alarm input that will trigger the offsite backup or select Any Alarm Input.
Pre/Post Alarm
Backup
Specifies the number of minutes of footage to save prior to and after the alarm event.
SMTP Server
To send notification emails, VIGIL Server needs to connect with a valid SMTP server.
SMTP Server
Location
The IP address or network name of the SMTP server.
Port Enter the port number to use for the SMTP server. The default port number is 25.
Requires SSL Check this box if the SMTP Server requires SSL.
Test Email
Opens a window that allows you to test the email functionality to ensure that email notifications will
work correctly.
Requires
Authentication
If the SMTP server requires authentication, enable this setting and enter a valid user name and
password.