eLine Technology ETV_v7 - Manual (Page 114)

ETV System Server Software - User’s Guide Page 114
15 Settings - Data Tab
The VIGIL Server Software can be configured to receive and record information from POS/ATM data terminals.
The Data tab allows configuration of the data terminal settings.
POS/ATM Terminal Settings
POS/ATM
Terminals
Select the Terminal Number for the POS/ATM Data stream from the Drop-Down Menu.
Enabled Enable the POS/ATM Terminal.
POS/ATM Settings
Connection Type Select whether the POS/ATM Data stream uses a Serial or IP based connection.
POS/ATM
Terminal Type
Set the type of Terminal for the POS Data stream.
Priority Camera Opens the Priority Camera Settings window.
Priority Camera Settings
The Camera that is pointed directly at a POS/ATM Register is referred to as a Priority Camera. Priority
Cameras are assigned to the a specific Terminal and Register Number. Multiple Terminal / Register numbers
can be assigned to a single Priority Camera. Note: Priority Cameras are global across Internal and External
POS/ATM Data Sources.