eLine Technology ETV_v7 - Manual (Page 13)

ETV System Server Software - User’s Guide Page 13
Stop Stops the video feed from being displayed, but does not stop recording.
Reset to Default Resets all cameras to their default position for the current camera layout.
Camera Control Opens the Camera Control pad that allows users to control PTZ cameras.
Digital PTZ
Enable Digital PTZ to use PTZ control features within a fixed camera image. Zoom in and then use
the PTZ control to pan and tilt within the fixed image. This option is available and enabled by
default for all cameras that do not have alternative camera control setup in the camera settings.
Relays
Interfaces to the configured relays. Relays can be toggled on or off, corresponding to closed and
open states respectively.
# - Camera
Changes the current video feed on the selected camera. If that video feed was on another camera
display, it will move the camera feed to the new location.
3.3 TV Output Switch
With supported hardware, VIGIL Server can display a number of video feeds to analog monitors. Outputs with
Multiplexor support can be configured as a multiplexed video output similar to the Live Viewer. The number of
analog outputs and multiplex analog outputs varies between models; please check the DVR model specification
for details.
Note: Capture Card Types with multiplex analog output features available include:
DVR200X, DVR100X, DVR50X – one monitor output with multiplex support and one monitor
output with single camera support
PROSERIES – output cards are available for use with this capture card type, all with multiplex
support
The TV Output Switch changes the camera displayed on the monitor by selecting the camera
number. If no monitors are selected, click on the desired monitor number before selecting the
camera number.
On systems supporting Mux/Analog Out, you can also select the Setup Analog Out Multiplexer menu
item, which opens the Analog Out Multiplexer window (see below).
To arrange cameras within the selected display grid, right-click on
a particular position and select a camera. Camera positions are
configured separately for each grid style.
Undoes any layout changes that have been
made since the Analog Output Multiplexer
window was last opened.
Toggles captions on and off for the Analog
Output Monitor video feeds.