eLine Technology ETV_v7 - Manual (Page 68)

ETV System Server Software - User’s Guide Page 68
8.5 Video Loss Tab
If the video signal is lost from an enabled camera, you can specify an action to take in the Video Loss tab.
Video Loss Mode
Active Signal
Detection
Enables hardware signal loss detection if the DVR capture card supports this feature.
Sensitivity Adjusts the sensitivity of the software signal loss detection.
Blank Camera
Detection
When enabled, the software detects a signal loss when the live video is all black or white. This is
useful if the camera is covered or blocked, and can be used in addition to or in place of hardware
signal loss detection.
Record Blank
Camera
When enabled, the DVR continues recording the camera feed during a signal loss. The Recording
Mode for the camera must be set to Constant for this feature to work.
Video Loss Trigger
When enabled, Video Loss Detection triggers a DIO Relay.
Output Relay Select the DIO Relay.
Trigger
Select the type of trigger for the DIO Relay: Momentary, which lasts two seconds or Latched,
which lasts until the Video is recovered.
Video Loss Email Notification
When Enabled, an Email will be sent to the recipients configured in Email Settings... For details on how to set
up Email recipients See Section Video Motion Alarm Advanced Settings – Email Notification Settings.
8.6 Audio Tab
The Audio tab allows you to choose a Priority Audio channel and Audio Talk device for each camera.
Priority Audio Recording
Channel
Select the Audio Channel that will be associated with this camera. Audio Channels are
configured on the Settings - Audio Tab.
Priority Audio Talk Device
Select the Audio Talk Device that will be associated with this camera. Audio Talk
devices are configured on the Settings - Audio Tab.