eLine Technology ETV_v7 User Manual
Page 61

ETV System Server Software - User’s Guide Page
61
Motion Recording Settings
When recording in Motion mode, click the Motion Settings… button to access the Motion Settings window. Here
you configure which regions of the video image are to be used for motion detection. To do this, simply draw on
the video. A semi-transparent overlay will be drawn over the video; this marks the motion detection region. To
clear a motion detection region, click and draw on it.
Invert Swaps
masked and clear regions.
Clear
Clears all masked regions.
Set All Masks
the entire image.
When latched on, the preview window will display motion detection blocks and their real-time
motion values overlaid on masked regions of the video. When motion is detected based on the
sensitivity, values are highlighted in yellow with red text.
Test Motion
Note: The Trigger Blocks setting does not affect the
motion test; the Test Motion feature is designed to test
the motion sensitivity only.
Trigger Blocks
Determines how many motion blocks must meet the motion sensitivity requirement to trigger
motion recording.
Motion Sensitivity
Adjust the Motion Sensitivity slider to control the amount of motion required to trigger recording.
Use a very sensitive setting to detect almost all motion, or a less sensitive setting to require only
very large movements to trigger recording.