eLine Technology ETV_v7 - Manual (Page 100)

ETV System Server Software - User’s Guide Page 100
10.6 Clients Tab
The Clients tab indicates how client connections should be handled. A client connection represents a network
connection to the DVR from an outside source.
Allow Rapidstream in Client
When enabled, the Playback window in VIGIL Client will have the option to playback
video at Full Resolution or at a CIF Resolution using Rapidstream technology.
Disable Rapidstream if Server
CPU Usage Exceeds
The Rapidstream playback on Client is handled by the Server before sending the
playback stream to the Client. To ensure functionality of the DVR Server is not
adversely affected, the Rapidstream playback will be disabled if the CPU on the
Server reaches the specified percentage. When the CPU Usage drops back below
the percentage the Rapidstream option will again be available. This can happen
dynamically during playback.
Max Network Connections Enter the maximum number of simultaneous client connections allowed.
10.7 Sequence Tab
The Sequence tab configures the camera display sequences for the analog output monitors or the analog live
viewer. Due to hardware limitations, only analog video feeds can be added to an output monitor sequence. A
sequence can be configured for hardware rendered live view using analog or IP cameras.
Monitor Number Select the analog output monitor number for the sequence.
Auto Start
Sequence
When enabled, the sequence for the selected analog output monitor is started automatically when
VIGIL Server starts.
Add Add a new camera to the sequence with a specified dwell time.
Edit Modify the dwell time of the selected camera.
Delete Remove the selected camera from the sequence.
Up / Down Moves the selected camera up/down in the sequence.