Draw-Tite 63139 BIKE CARRIER - PRO SERIES DUETTE - TRUNK MOUNT - Manual

:
:
63139
Cequent Performance Products
Plymouth, MI 48170
63139N Rev B 11-13
Printed in China
Trunk Mount 2 Bike Carrier
Assembly Instructions:
1. Remove and inventory content from box. (Figure 1)
2. Rotate upper support tube and align adjustment hole with crescent slot in main support assembly.
3. Install the supplied 1/4” x 1-3/4” long carriage bolt , spacer, and adjustment knob as shown in Figure 2.
4. Slide bike arm assembly onto main assembly and fasten with fasteners as shown in figure 3. Tighten
1/4” Hex nut so bike arm is tight. Slide on rack end strap and install lock nut so 2 threads are show
beyond nut. This will allow the strap attachment to pivot freely.
5. Install attachment straps as shown in figure 4
Page 1 of 12
FIGURE 1
Lower Support
Kit Contents:
Main Bike Carrier 1 ¼-20 x 1-3/4 Hex Bolt 2
Bike Arm Support 2 Strap – Vehicle End 4
Instructions 1 Adjustment Knob 2
Spacer 2 ¼-20 x 1-3/4 Carriage Bolt 2
Strap – Carrier End 2 ¼-20 Hex Nut 2
¼-20 Lock Nut 2
ITEM
DESCRIPTION
1-7/8” Height Adjustment for Lower Support
Bike Retaining Strap
Adjustment Knob
Straps – Vehicle End
Strap – Carrier End
Spacer
Bike Arm Support
Upper Support
Strap – Vehicle End
Main Bike Carrier