Asante Technologies 5212 - Manual (Page 78)

Console Management
Page 5-28
4 Press Return.
If the address is found within the table, it is
displayed along with the port number.
If the address is not found, the message “No
Such Entry” is displayed.
Setting the Age Out Timer
To set the MAC Forwarding Table’s Age-out Timer:
1 Open the MAC Forwarding Table Menu by
typing f on the Configuration Menu.
2 Type s to set the timer.
3 Enter the number of seconds you want the
addresses to remain in the table.
∆
Note: The default is 300 seconds.
4 Press Return.
The MAC Forwarding Table’s Age-out Timer is
configured.
book Page 28 Monday, March 2, 1998 4:27 PM