beautypg.com

Local management interface, Main menu, Accessing a submenu – Asante Technologies 5212 User Manual

Page 55: Exiting a submenu, Local management interface -5, Main menu -5, Accessing a submenu -5, Exiting a submenu -5

background image

Local Management Interface

Page 5-5

Local

Management

Interface

After you connect to the IntraSwitch 5212’s Local Management
Interface using either out-of-band Console or in-band Telnet
connection as described in Chapter 4, the Main Menu appears,
as shown in Figure 5-1.

Main Menu

Figure 5-1

Local Management Interface Main Menu

From the Main Menu, you can access three submenus:

"General Information Menu" on page 5-6

"Configuration Menu" on page 5-7

"Statistics Menu" on page 5-37

If you are using Telnet, a fourth option will be available — Close
Connection. This option closes your remote connection to the
IntraSwitch’s Local Management Interface.

Accessing a

Submenu

To access a submenu, type the command letter of the
corresponding option (e.g., type g for General Information).

Exiting a

Submenu

To exit a submenu, type q. To exit a command line (e.g., Set
Console Password in the Configuration Menu), press ctrl-c.

Note: For a one-page map of the Main Menu
and its submenus, refer to Appendix D, “Con-
sole Management Menu.”

book Page 5 Monday, March 2, 1998 4:27 PM