Asante Technologies 5212 - Manual (Page 40)

LED Indicators
Page 3-2
LED Indicators
The IntraSwitch 5212 has five rows of LEDs on its front panel
that convey the status of each 10Base-T port as well as the
status of the 10/100TX port and Asanté MII expansion port (if
installed). See Figure 3-1.
The five rows of port LEDs display:
❏ 100 Mbps operation
❏ Max Util (maximum utilization)
❏ FDP/COL (full duplex or collision)
❏ Data
❏ Link
Figure 3-1 IntraSwitch LED panel
The IntraSwitch 5212 also has four diagnostic LEDs that are not
labeled on its front panel. They light once when the
IntraSwitch 5212 is first powered on or is reset. See "Diagnostic
LEDs" on page 3-4 for more information.
▲
Important! The diagnostic LEDs are not
labeled on the IntraSwitch 5212’s front panel.
IntraSwitch 5212
Pwr 100 Mbps
Max Util
FDP / COL
Data
Link
10/100 1 2 3 4 5 6 7 8 9 10 11 12 MII
10/100
Uplink
Port LEDs
Power
LED
Diagnostic LEDs (not labeled)
book Page 2 Monday, March 2, 1998 4:27 PM