Asante Technologies 5212 - Manual (Page 68)

Console Management
Page 5-18
Table 5-6 SNMP Parameter Settings
Setting Description
SNMP Read
Community
The IntraSwitch 5212’s SNMP read community
string.
The read community string is a single word
that defines access rights for reading SNMP
data objects.
The default setting is public.
SNMP Write
Community
The IntraSwitch 5212’s SNMP write
community string.
The write community string is a single word
that defines access rights for writing SNMP
data objects.
The default setting is private.
Trap Authentication The status of the SNMP agent to generate
authentication traps.
Note: An authentication trap is sent when a
network management station with an invalid
community string attempts to access the
IntraSwitch 5212.
The default setting is disabled.
SNMP Trap Receivers The IP addresses of the network management
stations that can receive traps. Normally,
these addresses are the same as your network
management software systems’ IP
address(es).
Important! A maximum of four trap
receivers is allowed.
book Page 18 Monday, March 2, 1998 4:27 PM