Asante Technologies 5212 - Manual (Page 62)

Console Management
Page 5-12
Configuring TCP/IP Parameters
This menu displays and allows you to change the information
needed to access the IntraSwitch 5212 over the network (in-
band management).
To access the TCP/IP Parameter Menu, type i from the
Configuration Menu. The following menu appears.
Figure 5-5 TCP/IP Parameter Menu
∆
Note: By default, each parameter is set
to 0.0.0.0.
Current Settings
Table 5-4 explains each setting on the TCP/IP Parameter
Menu.
For information on using the menu, see:
❏ "Changing TCP/IP Information" on page 5-13
Table 5-4 TCP/IP Parameter Settings
Current Settings
Setting Description
Switch IP Address The IntraSwitch’s IP (Internet Protocol)
address.
Switch Subnet Mask The subnet mask of the network on which the
IntraSwitch is located.
Switch Default
Gateway
The address of the IntraSwitch’s default
gateway.
book Page 12 Monday, March 2, 1998 4:27 PM