Accessories – Climax BB5000 LINE BORING MACHINE User Manual

Page 9

acceSSorieS

Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:

1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]

page 9

axial leadscrew assembly

Stationary leadscrew assembly is fixed in position by screwing it into

the rotational drive assembly or into tack weld mounting block. Acme

nut holds leadscrew in place. Includes leadscrew and two Acme nuts.

Leadscrews available in lengths below. Other lengths available by request.

28654

12 inch (304.8 mm) travel

28687

24 inch (609.6 mm) travel

28688

36 inch (914.4 mm) travel

39335

48 inch (1219.2 mm) travel

28756

Leadscrew tack weld block

Set-up cones

Cones slide onto the bar and into fairly round, in-line holes for fast set-

up. Set screws and back-up clamp collars hold the cones in place while

the components are being attached.

26263

Set of 2 aluminum set-up cones, 1.5 - 3.25 inch (38.1 - 82.6

mm) bore ID. fit 1-¼ inch (31.8 mm) diameter bars.

26507

Set of 2 cast iron set-up cones for 2.75 - 8.37 inch (69.9 - 212.6 mm)

bore ID. fit 2-¼ inch (57.2 mm) diameter bars.

26508

Set of 2 cast iron set-up cones for 8.37 - 12 inch (212.6 - 304.8 mm)

bore ID. fit 2-¼ inch (57.2 mm) diameter bars.

26383

Full set of cast iron set-up cones for 2.75 - 12 inch (69.9 - 304.8 mm)

bore ID. fit 2-¼ inch (57.2 mm) diameter bars.

31801

Set of 2 cast iron set-up cones for 2.75 - 8.37 inch (69.9 - 212.6 mm)

bore ID. fit 2 inch (50.8 mm) diameter bars.

id mount self-aligning bearing support assembly

20319

Bearing support assembly provides 4-way adjustable bar

alignment. Fits bores with ID’s from 11.5 - 24 inches (292.1 -

609.6 mm). Bar is held in place by a self-aligning bearing.

Assembly includes chuck and bearing, three sets of jaws, two

sets of jacking screws, and one set of 1 inch (25.4 mm)

spacers.

cantilever mounting assembly

28799 Cantilever standoff mounts between two

bearing mounting brackets to ensure machine rigidity when

blind boring, trepanning, spade drilling, or tapping. Order

bearing mounting brackets separately. Order two assemblies

when using a double arm mount.

accessories for drilling and Blind hole Boring

Turn your BB5000 into a powerful drilling system with the following accessories. A

wide array of options available, please talk to us about your needs - we can

customize a package to fit your specific need.

57140 drill Base

Includes drill stand with grip tight bearing, tack weld spacers and all

hardware.

Customer will need to order #4 or #5 Morse Taper or straight shank

bar (1), single arm bearing mount and drill tooling as well as BB5000

drive and feed to make a complete drill package

Morse taper and Straight shank bars

Climax sells special bars for drilling and blind hole boring. Options include #4 and #5

Morse Taper and bars with Morse Taper on one end and 1.25” straight

shank on the opposite end. For most applications we recommend the

#4 Morse Taper. The majority of our drilling and blind hole boring

tooling is supplied with #4 Morse Taper.

56524 coolant Mister

Supplies Cooling Mist Directly to the Cutting Edge through the Super

Drill or Allied Machine & Tool RCA (Rotary Coolant Adapter)

59804 New-Lube Coolant, 1 gallon

Super drill

57629

Kit A1 1.968 - 2.165 inches (50 - 55 mm) #4 Morse taper

57647

Kit A2 2.165 - 2.559 inches (55 - 65 mm) #4 Morse taper

57652

Kit B 2.559 - 3.149 inches (65 - 80 mm) #4 Morse taper

57661

Kit C 3.149 - 3.937 inches (80 - 100 mm) #4 Morse taper

57667

Kit D 3.937 - 4.724 inches (100 - 120 mm) #4 Morse taper

57692

SBG Sharpening Fixture

See the Climax Drilling & Blind Hole Boring supplement for a complete listing of

insert, drill components and accessories.

criterion

59767

CB-203D 3 inch (76.2 mm) diameter boring head kit

59768

CB-204D 4 inch (101.6 mm) diameter boring head kit

CLIMAX Portable Machine Tools, Inc. ©

Newberg, OR USA 97132

WWW.CPMT.COM inside U.S. 1-800-333-8311

57140

RIGHT ANGLE BASE ASSEMBLY

31802

Set of 2 cast iron set-up cones for 8.37 - 12 inch (212.6 - 304.8 mm)

bore ID. fit 2 inch (50.8 mm) diameter bars.

Spherical bearing mounts

Available in single arm, double arm, and universal mount styles, our spherical

bearing mounts attach directly to the work piece, and accept both the model BB5000

rotational drive, and the mounting bracket for the Climax AutoBoreWelders.

Includes bracket, bearing, and hardware.

Single arm bearing mount

37472

for 2-¼ inch (57.2 mm) bars

36710

for 2 inch (50.8 mm) bars

double arm

37473

for 2-¼ inch (57.2 mm) bars

29953

for 2 inch (50.8 mm) bars

universal

36959

for 2-¼ inch (57.2 mm) bars

63535

Universal arm 24 inch (609.6 mm) extension kit

37626

ID Mount, for 8.6 - 11.2 inch (218.4 - 284.5 mm) diameter.

37621

Universal bearing ID conversion kit

Spherical bearing

26248 Spherical Bearing - 2-¼ inch (57.2 mm).

Bearing mounts to bracket to align the bar.

29951 Spherical Bearing - 2 inch (50.8 mm).

Same as above, but for 2.0 inch (50.8 mm) diameter.

Order mounting hardware separately.

face-adjustable id bearing mount

46293 Ideal for mounting the BB5000 in deep or blind bores, this ID

bearing mount provides an ID mounting range of 5.75 - 12.5

inches (146.1 - 317.5 mm). Easily install and adjust the mount

from the open face part of your bore. Independently adjustable

mounting legs also simplify centering the mount in bores which

are not perfectly round.

46227 1.5 inch extension jaw to extend reach (need 4)



Portable Machine Tools, Inc. ©

Newberg, OR USA 97132

WWW.CPMT.COM inside U.S. 1-800-333-8311

46293

BB5000 ID STEADY REST PARTS VIEW



Portable Machine Tools, Inc. ©

Newberg, OR USA 97132

WWW.CPMT.COM inside U.S. 1-800-333-8311

20319

MOUNT ID CHUCK AND JAW ASSEMBLY 2-1/4 ID BB5000



Portable Machine Tools, Inc. ©

Newberg, OR USA 97132

WWW.CPMT.COM inside U.S. 1-800-333-8311

28799

CANTILEVER MOUNT

ASSEMBLY

2-¼ Inch (57.2 mm) diameter Bars for Drilling and Blind Hole Boring
Bar Length
Inch (mm)

#4 Morse

Taper only

#4 Morse

Taper and

straight Shank

#5 Morse

Taper only

#5 Morse

Taper and

Straight

Shank

24 (609.6)

58828

19282

18715

36 (914.4)

36114

61459

19283

18716

48 (1219.2)

38277

61502

19284

18717

60 (1524.0)

58827

19285

18718

72 (1828.8)

36113

61503

21131

58820

96 (2438.4)

38278

61504

19286

58821

144 (3657.6)

34200

No. Description

CLIMAX Portable Machine Tools, Inc.

SIZE

CAGE CODE:

DWG NO:

REVISION

SCALE:

SHEET

DRAWN BY:

CHECKED BY:

MFG SERVICES:

DATE:

ADDITIONAL INFORMATION AND

SPECIFICATIONS REQUIRED TO

MANUFACTURE THIS PART ARE

PROVIDED IN CLIMAX SPEC. P100

CAD/CAM STD

MATERIAL:

COSMETIC CLASS

EXCEPT AS NOTED

DIMENSIONS ARE IN INCHES

PER ASME Y14.5M-1994
.X

.XX

.XXX

ANGLES

 .030

 .010

 .005

 .5

15509

FULL

JCC

7/26/2010

61505

CHART BBAR 2-1/4 KCR X 1.25 DIA

STSH 4MT

4-3D

CLIMAX®

©� � � � � � �

CONFIDENTIAL PROPERTY OF

CLIMAX PORTABLE MACHINE TOOLS, INC.

APPROVED BY:

DATE:

GEP
JAM

7/28/2010
7/28/2010
7/29/2010

AGT

NOTE: Drawings are for reference only, are not to scale, and may not represent actual product.

CLIMAX Portable Machine Tools, Inc.

SIZE

CAGE CODE:

DWG NO:

REVISION

SCALE:

SHEET

DRAWN BY:

CHECKED BY:

MFG SERVICES:

DATE:

ADDITIONAL INFORMATION AND

SPECIFICATIONS REQUIRED TO

MANUFACTURE THIS PART ARE

PROVIDED IN CLIMAX SPEC. P100

CAD/CAM STD

MATERIAL:

COSMETIC CLASS

EXCEPT AS NOTED

DIMENSIONS ARE IN INCHES

PER ASME Y14.5M-1994
.X

.XX

.XXX

ANGLES

 .030

 .010

 .005

 .5

15509

FULL

darren-w

3/9/2011

56524

Default

APPLICATOR OIL MIST

4-3D

??????????????????

CLIMAX®

©� � � � � � �

CONFIDENTIAL PROPERTY OF

CLIMAX PORTABLE MACHINE TOOLS, INC.

APPROVED BY:

DATE:

Single arm

mount

Double arm

mount

Universal

mount