Climax BB5000 LINE BORING MACHINE - Manual (Page 12)

ApplicAtion photos
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 12
a Wide Variety of applications
Do you need to put the axial feed unit on one end of the bar and the rotational drive on
the other? No problem... all you need to do is use the leadscrew block clamped or tack
welded to the work piece. In fact, just about any arrangement of components can be used
as long as you maintain rigidity by placing bearing supports as close as possible to the
holes to be bored. Need to align and multiple holes? Just use a long bar and weld a
bearing bracket at each hole for support or use optical alignment for easy & precise setup
over long distances. Modular components let you use the machine in a wide variety of
combinations.
The BB5000 is widely
used by these industries:
• Construction
• Mining
• Power Generation
• Ship building
• Transportation
• Petrochemical
• Pulp and paper
• Steel and aluminum
Typical applications:
• Heavy equipment repair
• Stern tube boring
• Wicket gate repair on dams
• Bridge building/re-building
• Turbine coupling boring
• Engine block repair
• Bearing seat repair
• Press repair
• Valve body boring
• Pump body boring
• Large fab bore alignment