Climax BB6100 LINE BORING MACHINE - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SPecificationS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Boring and Facing Ranges:
Boring diameter range, standard stack block assembly: 8.8 - 38.0 inches 223.5 - 965.2 mm
Boring diameter range, boring/facing arm assembly:
with 18 inch (457.2 mm) boring/facing arm 19.9 - 32.1 inches 505.5 - 815.3 mm
with 23 inch (584.2 mm) boring/facing arm 24.8 - 42.1 inches 629.9 - 1069.3 mm
Recommended facing diameter range,
using mechanical facing head assy: 10.6 - 38.0 inches 269.2 - 965.2 mm
Facing diameter range, boring/facing arm assembly:
with 18 inch (457.2 mm) boring/facing arm 17.5 - 32.1 inches 444.5 - 815.3 mm
with 23 inch (584.2 mm) boring/facing arm 17.5 - 42.1 inches 444.5 - 1069.3 mm
Facing diameter range, boring/facing arm assembly, tool post reversed:
(“tool post reversed” refers to rotating the tool post so that the tool is on the bar side of the tool post.)
with 18 inch (457.2 mm) boring/facing arm 7.5 - 20.1 inches 190.5 - 510.5 mm
with 23 inch (584.2 mm) boring/facing arm 7.5 - 30.1 inches 190.5 - 765.5 mm
Performance Data
Rotational Drive Unit (RDU) gear ratio: 6:1 gear reduction 6:1 gear reduction
Hydraulic motor size affects torque and speed
Theoretical values calculated using a 10 Hp hydraulic power unit producing 2000 psi (13790 kPa) continuous,
[normal operation is 1200 psi (8270 kPa)] and pumping 10 gpm (37.9 l/min).
Hydraulic motor size range:
3.6 - 17.9 in 3 59.9 - 293.3 cm 3
Boring Bar Torque: 470 - 1820 ft•lb 637.2 - 2467.6 N•m
Max boring rpm: 107 - 21 rpm 107 - 21 rpm
For example, with 11.3 in3 (185.3 cm3) hydraulic motor (43457):
Boring Bar Torque: 1435 ft•lb 1945.6 N•m
Max boring rpm: 33 rpm 33 rpm
Feed Rate of mechanical Axial Feed Unit (AFU): 0.003 - 0.020 inches/rev 0.076 - 0.508 mm/rev
Feed Rate of electric Axial Feed Unit (AFU): 0 - 0.3 inches/min 0 - 7.62 mm/min
Measures
Shipping Weights (estimated):
Machine includes Rotational Drive Unit (RDU), Axial Feed Unit (AFU),
boring head set, tool carrier, tool kit, and hydraulic motor.
for machine (wood crate) 640 lbs 290.3 kg
for machine (metal crate) 740 lbs 335.7 kg
for one 4 arm bearing assembly 160 lbs 72.6 kg
for one 3 arm bearing assembly 80 lbs 36.3 kg
for boring bar 2.5 lbs/inch 0.04 kg/mm
for 10 Hp Hydraulic Power Unit 500 lbs 226.8 kg
Shipping dimensions:
Machine, in wood crate, W, D, H 18.5 x 34 x 24 inches 469.9 x 863.6 x 609.6 mm
Machine, in steel crate, W, D, H 43.3 x 29.5 x 22.5 inches 1099.8 x 749.3 x 571.5 mm
Bearing (each bearing shipped separately) W, D, H 32 x 32 x 11 inches 812.8 x 812.8 x 279.4 mm
12 foot (3657.6 mm) bar W, D, H 11 x 13 x 154 inches 279.4 x 330.2 x 3911.6 mm
10 Hp Hydraulic Power Unit W, D, H 27 x 33 x 48 inches 685.8 x 838.2 x 1219.2 mm