Climax BB8100 LINE BORING MACHINE - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SPecificationS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Boring and Facing Ranges
Boring diameter range, standard stack block assembly: 18.1 - 80.1 inches 459.7 - 2034.54 mm
Boring diameter range boring/facing arm assembly:
with 26 inch (660.4) boring/facing arm assembly 28.9 - 43.7 inches 734.1 - 1110.0 mm
with 34 inch (863.6) boring/facing arm assembly 36.5 - 59.7 inches 927.1 - 1516.4 mm
with 53 inch (1346.2) boring/facing arm assembly 55.1 - 97.7 inches 1399.5 - 2481.6 mm
Facing diameter range, mechanical facing head assembly:
with 5, 8, or 12 inch (127.0, 203.2 or 304.8 mm) 24.5 - 80 inches 622.3 - 2032.0 mm
mechanical facing head assemblies
(5 and 8 inch facing head assemblies have 8 inch stroke, 12 inch facing head assembly has 12 inch stroke)
Facing diameter range, slide arm assembly:
with 26 inch (660.4) boring/facing arm assembly 23.1 - 43.7 inches 586.7 - 1110.0 mm
with 34 inch (863.6) boring/facing arm assembly 23.1 - 59.7 inches 586.7 - 1516.4 mm
with 53 inch (1346.2) boring/facing arm assembly 23.1 - 97.7 inches 586.7 - 2481.6 mm
Facing diameter range, boring/facing arm assembly (tool post reversed):
(“tool post reversed” refers to rotating the tool post so that the tool is on the bar side of the tool post.)
with 26 inch (660.4) boring/facing arm assembly 14.0 - 17.4 inches 355.6 - 442.0 mm
with 34 inch (863.6) boring/facing arm assembly 14.0 - 27.4 inches 355.6 - 696.0 mm
with 53 inch (1346.2) boring/facing arm assembly 14.0 - 49.4 inches 355.6 - 1254.8 mm
Performance Data
Rotational Drive Unit (RDU) Gear Ratio: 20 : 1 10 : 1 optional (2xfast, 1/2torque)
Hydraulic motor size affects torque and speed
Theoretical values calculated using a 25 Hp hydraulic power unit producing 2000 psi (13790 kPa) continuous,
[normal operation is 1200 psi (8270 kPa)] and pumping 15 gpm (68 l/min).
Hydraulic motor size range: 7.3 - 17.9 in3 119.6 - 293.3 cm3
Boring Bar Torque with 20:1 RDU: 3350 - 6068 ft•lb 4542 - 8227.1 N•m
Max boring rpm with 20:1 RDU: 23.5 - 9.6 rpm 23.5 - 9.6 rpm
For example, with 11.3 in3 (185.3 cm3) hydraulic motor (43457):
Boring Bar Torque with 20:1 RDU: 4783 ft•lb 6484.9 N•m
Max boring rpm with 20:1 RDU: 15.1 rpm 15.1 rpm
Feed Rate of mechanical Axial Feed Unit (AFU): 0.003 - 0.030 in/rev. 0.076 - 0.762 mm/rev.
Feed Rate of electric Axial Feed Unit (AFU) In “slow” speed 0 - 0.3 in/min. 0 - 7.62 mm/min.
Measures
Shipping weight (estimated):
(machine with RDU, AFU, boring head set, tool carrier, tool kit, and hydraulic motor.)
for machine (metal crate) 5700 lbs. 2585.5 kg
for machine (wood crate) 5850 lbs. 2653.5 kg
for 1 Bearing 1070 lbs. 485.3 kg
for boring bar 14.5 lbs/inch 2.6 kg/cm
15 Hp or 25 Hp Hydraulic Power Unit 1073 lbs 486.7 kg
Shipping dimensions:
Machine, in wood crate, W, D, H 18.5 x 34 x 23.7 inches 469.6 x 863.6 x 602 mm
Machine, in steel crate, W, D, H 20 x 40 x 25 inches 508 x 1016 x 635 mm
Bearing (each bearing shipped separately) W, D, H 40 x 40 x 12.7 inches 1016 x 1016 x 322.6
12 foot (365.8 cm) bar W, D, H 24 x 18 x 152 inches 609.6 x 457.2 x 3860.8 mm
15 or 25 Hp Hydraulic Power Unit W, D, H 64 x 30 x 50 inches 1625.6 x 762 x 1270 mm